Elite PC Titan FX: Chenbro Xpider Chassis
Elite PC uses the attractive Chenbro Xpider chassis for their Titan FX system. It is combined with a 460-watt power supply and offers outstanding expansion capabilities, particularly for hard drives. The silver and black case can mount up to 6 3.5" hard drives, and easily handles the 2 Western Digital Raptor 10,000RPM drives in a RAID 0 array. A front mounted fan blows intake air across the hard drive cage to cool the drives.
The Titan FX uses black drives and peripherals to match the case.
Elite PC uses a huge 120mm fan for output air on the Titan FX. Large fans like this can turn at slow and quiet rpm, but still move massive amounts of air for cooling. Generally they are a better solution than small, noisy fans that must run at high rpm to move much air.
The Titan FX provides the see-thru side window seen on many gaming systems these days. It is also equipped with a Blue Neon case light.
Inside a front lift-open door are the front jacks, which include 3 USB, firewire, headphone and mic jacks.
With the motherboard, ATI Radeon XT, Creative Audigy 2, and MSI TV@nywhere card, there are a plethora of jacks on the rear panel. You get 2 more USB 2.0 jacks, the full complement of Audigy 2 audio I/O, digital and analog outputs on the ATI 9800 XT, video ports on the TV card, 10/1000 LAN port, parallel, and 2 serial, game and PS2 mouse/keyboard ports. The incredible selection of available ports on the delivered Titan FX should satisfy just about any expansion need.
Getting into the Titan FX case is fairly simple, since it is a screw-less design. Slide a lever at the left rear and the entire left side panel can be removed. The standard system is loaded with top-line components, as you can see in this photo.
With the case open, you get a good view of the simple, but effective, cooling system for the Athlon64 FX51. Cooling air is pulled into the case by an 80mm intake fan at the bottom front of the case. The CPU itself is cooled by an AVC/MSI heatsink-fan with thin copper fins and a 70mm fan. Hot air from the system is exhausted at the upper rear by a 120mm fan. While we did not measure noise level, the whole system is on the noisy side as shipped. Most of the noise is generated by the 120mm fan, which is turning at a much higher rpm than is necessary. We would strongly suggest using the Smart Fan features in the PC Health section of the BIOS to tie the 120mm fan to system temperature. Just doing this drops noise levels substantially without compromising system temperature. The good side to the high-speed 120mm fan is that you do have the option to move massive amounts of air for system overclocking.
ncG1vNJzZmivp6x7orrAp5utnZOde6S7zGiqoaenZH5zfI9oaQ%3D%3D